Casual FNR-6U "Metron" (2xUAC20 4xMPL LE300)

Thread in 'FNR-6U' started by Excalibaard, Apr 19, 2018.

  1. Excalibaard

    Excalibaard 101 010 Staff Member

    5,278
    1,110
    269


    Brawls well, has plenty DHS for the two UAC20s with 4MPL as backup.
     
  2. WrathfulMonk

    WrathfulMonk Benefactor

    18
    2
    15
    why ultras? don't they jam too much in a brawl?
     
  3. Excalibaard

    Excalibaard 101 010 Staff Member

    5,278
    1,110
    269
    UAC20 has 20% cooldown quirks. As long as you don't double tap they will not jam and you'll still get 25% increased dps over regular ac20. If you do double tap you can get more burst damage at risk of jams.
     
  4. WrathfulMonk

    WrathfulMonk Benefactor

    18
    2
    15
    Thank you, i didn't know the double tap was the reason for the jam
     
  5. Excalibaard

    Excalibaard 101 010 Staff Member

    5,278
    1,110
    269
    It's up for debate, some people claim that it can jam at a first shot as well. But, as far as I am aware the jam is checked when a trigger is sent for the second shot, before it fires.

    So, if you accidentally press to fire just before it finishes the normal reload, it may still jam after 1 shot (or if you accidentally click twice in rapid succession). It takes a bit of practice to get used to it though.
     
    invernomuto likes this.
  6. CarloArmato

    CarloArmato Professional Potato Carrier

    1,971
    602
    195
    35% heat management on a brawler is really low, even more since Smurphy does not take into account the additional heat generated from successfull double taps.

    With ML you can upgrade to LE325 and have an overall better heat management... UAC20 should be your priority weapons and they are hot, so there is little point to fit MPL which are even hotter compared to ML (both faster cooldown and heat generated per shot)


    EDIT: you can even fit a STD 325 engine by losing 1 DHS
     
top-fast
top-fast
top-fast
top-fast